Collection: Pump Spares & Accessories

The Kamoer X1 PRO Liquid Dosing Pump is the latest state of the art controllable liquid dosing pump from Kamoer. Each X1 PRO is integrated with Wifi for complete control via mobile device (iPhone or Android). An easy to use app intuitively sets up single or multiple X1 PRO pumps to any desired dosing regimen. 

Flexible and precise control of liquid additions to your aquarium. Easy to use mobile interface makes set up a breeze. Daisy chain up to 4 - X1 PRO dosers per power supply 

X1 PRO Software Features:

• Add multiple X1 PRO pumps to control via wifi
• Daisy chain up to 4 - X1 PRO pumps per power supply
• Flow calibration setting 
• Operational modes (Manual, Auto, Quick Setting)
• Easy setting - Set dosing start and stop time (does not have to be 24 hours)
• Enter the total number of ml to be dosed over the time period 
• Enter the number of times to dose each time period (up to 24 times)
• User can even choose dosing every 1-99 days or certain days per week
• Adjustable dosing volume Auto Mode: 0.1 - 9999.9ml
• Adjustable dosing volume Manual Mode
• Delay setting between channels prevents chemical inteference
• Settings saved if power lost, The clock keeps running byt the battery during the power-off process
• Monitors the amount of liquid remaining in dosing container
• Upgrade firmware via OTA

*Requires wifi capable mobile device to operate*

Specs:

Dosing Channel: 1

Dosing Times: 24 times/day - once/99days

Fluid Volume: 0.1ml - 9999.9ml

Accuracy: <+/-2%

Pump Life: >2000 hours

Inside the package:

X1 PRO dosing pump

Graduated cylinder 

Power adapter - up to 4 X1 pumps 

PVC Tubing: ID*OD 3*5mm

X2SR is a twin head, WIFI water change pump, Automate water changes on your aquarium. One pump removes water the other replaces it.

           Features:

• Auto water change and auto top off are all-in-one.
• Water change at specified volume and adjustable flow rate.
• Wi-Fi remote control via iPhone/Android device.
• Use Stepper peristaltic pump to meet long-term use and high accuracy.
• High quality PharMed@ Tubing used in pump heads.
• Intergate multiple liquid level sensors to ensure the safety of the system.
• Upgrade firmware via OTA
• Dimentions: 168mm x 177mm x 223mm.
  
  Software details:
   
• Two water change modes: refill after drain, drain and refill at the same time.
• 1-24 water change plans per day.
• Water change frequency from 1 day to 99 days.
• The flow rate of drain/refill pump can be set freely.
• Flow rate calibration and correction for drain/refill pump.
• Push alarm to the user's mobile device once the device is abnormal.
• Auto synchronized network time.

Replacement ATO Pump for the Kamoer X2SR Auto Water Change System

- JT-280 DC 24v (Submersible Pump)

Compatibility 

- Kamoer X1 Pro 2 Replacement Pump Head

- Kamoer X5S

Kamoer Dosing Pump Spare Pharm Tube

Length: 135mm 

Replacement hose for pump head for Kamoer X5S and X1 Pro V2.

Size: Inner Diameter 2mm, Outer Diameter 4mm. 

Genuine Kamoer Replacement Tube assembly for F4 PRO / X4 PRO

Genuine Kamoer X2SR/KHL replacement tube assembly with 2pc connectors

BPT tube 6.4 mm ID x11.4 mm OD

Ecotech Marine Foam Guards MP20/40 (3 pack)

Pack of three foam covers for VorTech MP20 and MP40 wet sides.

Ecotech Marine Foam Guards MP10 (3 pack)

Pack of three foam covers for VorTech MP10 wet sides

Keeping your power supply mounted will help keep your power center looking clean while providing an extra level of safety by allowing you to make and keep drip loops in place. The two-piece design clamps the power supply from the top and bottom, and Velcro straps hold it directly to the brackets. Each bracket can be spaced for your exact power supply's length and are mounted independently.

• Works with various brands
• Easy to remove with Velcro straps
• Secures power supply from the top and bottom
• Mounts a single power supply 

Ecotech Marine Power Supply Mounting Brackets are compatible with most standard power supplies found in the aquarium hobby.

Suits:

• MP10
• MP40
• MP60

Mounting Instructions:

1. Place the power supply in the mounting brackets and use the Velcro straps to secure the brackets in place on the power supply.
2. Remove the adhesive backing from the temporary mounting tabs on the back of the brackets.
3. Place the bracket where you want to keep the power supply and press firmly.
4. Gently unhook the Velcro straps and remove the power supply from the mounting brackets.
5. Using the supplied screws drill the brackets into your stand or wall.
6. Replace the power supply and secure it with the Velcro straps.

What's Included?

2x Bracket Assemblies

4x Mounting Screws

4x Plastic Anchors

Instructions

Ecotech Marine Foam Guards MP60 (2 pack)

Pack of two foam covers for VorTech MP60 wet sides.

Your return pump is a vital part of life-support for your system. Don't leave your pump unprotected.

The specialized screen included in this kit will prevent livestock or any objects from entering the intake of your pump and causing blockage or failure. The barbed fittings allow for fast and easy plumbing with soft tubing without the need for additional fittings or adapters.

Intake Barb Size: 1" (2.54cm)

Output Barb Size: 3/4" (1.9cm)

What's Included?

• Ecotech Barb and Screen for Vectra S2 Pump
• 1x Intake Barb Fitting
• 1x Output Barb Fitting
• 1x Intake Screen